Description
Techspan Heating element type 33 (LE100689)
Suitable for hot air tools – Techspan Rion, Techspan Maron, Weldy 1600, Leister Triac S, Leister Diode S, Leister Diode PID.
- Wattage 1550
- Voltage 230
- Plug-in ceramic heating element
- Made in Switzerland
Which welders this fits
Type 33 heating element rated 1550W is the standard replacement element for Techspan Rion and similar Rion-class hot-air welders. Always check the model number printed on the existing element you’re replacing to confirm compatibility before ordering.
When to replace your heating element
- Lower air temperature at full setting than usual
- Longer warm-up time to reach welding temperature
- Intermittent operation – the welder cuts in and out
- Audible arcing from the welder body
- Visible damage on the element when inspected (cracking, discolouration)
Typical element life
With light to moderate use (a few welds a week), expect 18-24 months. Heavy daily commercial welding shortens this to 6-12 months. Continuous production use is shorter still. Keep a spare element on hand – replacing an element takes 10-15 minutes; sourcing one in the middle of a job is a day lost.
FAQs
Is replacement covered under warranty?
Heating elements are classified as wear parts – they’re consumable and not covered by the welder’s warranty. Replacement is straightforward and the element is a low-cost part.
Can I install a higher-wattage element?
No – the element rating is matched to the welder’s wiring and motor. Use only the specified element type for your welder model.
What about Type 38 or other variants?
Different welder models use different elements. Type 38B5 is for higher-output industrial blowers; Type 2A and Type 32A are different again. Check your welder model and match exactly. See our full accessories range.
